Free Delivery On All Orders Over £10*

STONELUX®

STONE EFFECT PAINT & REPAIR PRODUCTS

The UK's Leading Manufacturer of Stone Effect Coatings & Repair Products



Windowsill Stone Coating

PRODUCT INFORMATION

The weather can leave the exterior of your home looking old, tired and pretty unsightly.

Windowsill Stone Coatin is a water-based, high performance, stone effect paint which has been specially developed for transforming the exterior elements of your home into beatiful stone effect features.

Suitable for application onto old, weathered and pre-painted surfaces, including: stone, concrete and wooden windowsills, lintels, quion stones, window frames, doors and door surrounds, mullions and architectural mouldings.

  • Quick and easy to use. All instructions are on the tin.
  • Very hard wearing, breathable, weather resistant and UV stable.
  • An authentic finish that looks and feels like natural stone, but at a fraction of the cost.
  • Environmentall friendly - water based and low VOC
  • Breathable
  • Covers old paintwork

The unique ground-stone formulation of Windowsill Stone Coating makes it an ideal solution for keeping the outside of your home attractive and tidy. Also suitable for professional and commercial use.


COLOURS
Standard Colours
Inglenook Fireside - York Stone Inglenook Fireside - Bath Stone Inglenook Fireside - Cumbrian Slatestone Inglenook Fireside - Welsh Slatestone Inglenook Fireside - Fired Brick Red Inglenook Fireside - Terracotta Red
Limestone Magna Sandstone Buff Sandstone Rich Buff Sandstone Red Sandstone Grey Limestone
*Colours on screen may vary from actual stone effect paint. We recommend you request a free colour chart by calling us on 01405 720281 before making a purchase.
 
SUITABLE MATERIALS

COVERAGE & DRYING TIME
 
  • Wood
  • Wood Finishes
  • Old Paintwork
  • Plaster
  • Brickwork
  • Stone
  • Concrete
  • MDF 
  • Tiles
  • Ceramics
  • Marble
  • More.
Coverage: 2.5m2/litre (approx.) Coverage can vary by colour and application.

Drying Time: allow 2 hours to dry between coats. Drying time can vary by substrate and drying conditions.


VIDEO


GALLERY


CUSTOMER COMMENTS
See More Reviews
Write a Review

APPLICATION

Brush Application

  1. Stir coating well before use . To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted or lacquered surfaces.
  2. Apply StoneLux Primer using an economy natural bristled brush. Allow 1-3 hours to dry depending on conditions. A second coat of Primer may be applied where there is a significant colour change.
  3. Use an economy natural bristled brush. Lay a thin even coat of Windowsill Stone Coating onto the substrate. Ensure the paint is applied evenly to avoid concentrated areas of stone. Allow 1 - 3 hours drying time depending on conditions. Repeat step 3 applying a MINIMUM of 3 coats.
  4. If brush strokes remain, the final coat can be stippled while still wet using a small stipple or paste brush.

Application Tips

  • Use an economy natural bristled brush.
  • We recommend a minimum of 3 coats for a professional
  • Circulate warm air around the painted surface to decrease drying times.
  • If you catch or scuff the drying coating, simply brush over using your damp paint brush.

Spray Gun Application

  1. Stir coating well before use . To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted or lacquered surfaces.
  2. Apply StoneLux Primer using an economy natural bristled brush, roller or spray. Allow 1-3 hours to dry depending on conditions. A second coat of Primer may be applied where there is a significant colour change.
  3. Apply Windowsill Stone Coating in multiple thin layers. Ensure each layer is touch dry before apply the next. We recommend a MINIMUM of 2-3 layers. Circulating warm air will reduce drying time.
  4. Texture Spray Gun - use a nozzle size between 2mm to 5mm.
  5. Gravity Fed Spray Gun - use a nozzle size between 1.8mm to 2.5mm.
  6. Various psi settings can be used for a light or heavy finish (approx. 60psi fr a medium textured finish).
  7. If necessary, The Stone Range can be diluted, using no more than 20% water.

DOWNLOADS

Technical Data Sheet:

Material Safety Data Sheet:

Windowsill Stone Coating Product Leaflet:

 

RELATED PRODUCTS


FIREPLACE STONE COATING

Fireplace Stone Coating Tin


BRICK REPAIR FILLER


GARDEN STONE COATING


WINDOWSILL REPAIR PACK


 

 

 

© Copyright 2016 Charles Products*