A high performance Primer & Undercoat that forms a binding layer better prepared for the application of Stonelux Paints.
Select your chosen colour and tin size below.
*Excludes Northern Ireland, Scotish Highlands, Channel Islands, & Isle of Man.
Stonelux Primer and Undercoat has been specially formulated to prime and seal wood, MDF, concrete, brick, plaster, stone, marble, tile, ceramics and more.
We always recommend using Stonelux® Primer & Undercoat before any application of Stonelux Paints. Here are the reasons why:
Suitable for application onto old, weathered and pre-painted surfaces including, stone, concrete and wooden windowsills, lintels, quoin stones, window frames, doors and door surrounds, mullions and architectural mouldings.
Wood & Wood Finishes, Marble, Plaster, Masonry & Brickwork, Granite, MDF, Stone, Tiles, Resin, Concrete, Pre-Painted Surfaces
1L, 2.5L, 5L, 10L, 20L
Brush, roller or spray. We recommend natural bristled economy paintbrushes for use with all Stonelux Paints.
Washable once cured. Clean brushes with water.
Coverage: Up to 12 meters squared per 1 litre. Coverage can vary depending on the substrate.
VOC Content: LOV VOC CONTENT 0-0.29%. VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. EU limit value for this product(CatA/c):40g/l(2010) This product contains max 6g/l VOC.
Prepare all surfaces well. Ensure the surface is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted and glossy surfaces. Apply at least one coat of Stonelux Primer & Undercoat.
Stir well before use. Apply using an economy natural bristled brush, roller or spray. Avoid overspreading. Leave 2-3 hours to dry. A second coat of primer may be required where there is a significant colour change.
Stir well before use. Wet film thickness should be between 300 and 500µm. Do not over coat on corners or joints. Allow 2-3 hours drying time between coats. Primer & Undercoat can be diluted using no more than 20% water.