A hard wearing authentic stone paint perfect for refreshing your garden ornaments, planters and furniture.
Select your chosen colour, tin size (with or without Primer) & stone finish below.
PAINT CALCULATOR
FREE DELIVERY TO MAINLAND UK ON ORDERS OVER £125*
*Excludes Northern Ireland, Scotish Highlands, Channel Islands, & Isle of Man.
A high performance, stone effect paint, that gives a stone effect to garden items, including, terracotta pots, wooden planters, garden ornaments, fence posts and balustrades.
Get the look, feel and quality of natural stone at a fraction of the cost.
Suitable for application onto old, weathered and pre-painted surfaces including, stone, concrete, terracotta, wood, and more.
Wood & Wood Finishes, Marble, Plaster, Masonry & Brickwork, Granite, MDF, Stone, Tiles, Resin, Concrete, Pre-Painted Surfaces
1L, 2.5L, 5L, 10L, 20L
Brush, roller or spray. We recommend natural bristled economy paintbrushes for use with all Stonelux Paints.
Washable once cured. Clean brushes with water.
Composition:Water-based
Coverage: 7.5 meters squared per 1 litre. Coverage can vary depending on the substrate.
VOC Content: LOV VOC CONTENT 0-0.29%. VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. EU limit value for this product(CatA/c):40g/l(2010) This product contains max 6g/l VOC.
Do not apply in rain, temperatures below 10°C or above 30°C or if exposure to these conditions is likely during curing time.
Prepare all surfaces well. Ensure the surface is clean, sound and dry. Repair any damage with a suitable filler. Sane pre-painted and glossy surfaces. Apply at least one coat of Stonelux Primer & Undercoat.
Stir well before use. Apply using an economy natural bristled brush or a roller. Apply a MINIMUM of 3 even coats. Avoid overspreading. Leave 2-3 hours drying time between coats. Do not over brush/roll. If brush marks remain, finish with stippling before final coat dries.
Stir well before use. Apply 2-3 full and even coats to the surface. Wet film thickness should be between 300 and 500µm. Do not over coat on corners or joints. Allow 2-3 hours drying time between coats. Various psi settings can be used for a light or heavy finish (approx. 60psi for a medium textured finish). Nozzle size: 1.8-2.5mm (gravity fed gun) or 2-5mm (texture gun). Paint can be diluted using no more than 20% water.