Free Delivery On All Orders Over £10*

STONELUX®

STONE EFFECT PAINT & REPAIR PRODUCTS

The UK's Leading Manufacturer of Stone Effect Coatings & Repair Products



Fireplace Stone Coating

PRODUCT INFORMATION

Transform your new or existing fireplace into an elegant stone feature using Fireplace Stone Coating the fireplace paint.

A water-based, durable, stone effect fireplace paint specially formulated for application onto fire surrounds, back panels and hearths. Our unique and exclusive ground stone formulation provides a very hard-wearing, breathable stone effect finish that looks and feels like natural stone.

  • Quick and easy to use. All instructions are on the tin.
  • the appearance of a new stone surround without the mess or the cost.
  • An authentic finish that really does look and feel like a natural stone surround.
  • Environmentally friendly - Water-based and low VOC.

StoneLux Fireplace Stone Coating is an ideal and extremely cost effective alternative to replacing an existing fireplace, back panel or hearth. Making a stone fireplace more affordable.

Suitable for use on wood and wood finishes, marble, tiles, plaster, brickwork, MDF, resin, existing stone, concrete and more. If you have a solid fuel fire, Fireplace Stone Coating is only suitable for use on the surround (not the back panel or hearth).


COLOURS
Standard Colours
Limestone Magna Sandstone Buff Sandstone
Rich Buff Sandstone Grey Limestone Black Pearlstone
Fleck Colours
Limestone Fleck Magna Sandstone Fleck Buff Sandstone Fleck
Rich Buff Sandstone Fleck Grey Limestone Fleck Black Pearlstone Fleck
 
*Colours on screen may vary from actual stone effect paint. We recommend you request a free colour chart by calling us on 01405 720281 or purchase one on-line here before committing to a purchase.
 
SUITABLE MATERIALS

PROPERTIES
 
  • Wood & wood finishes
  • Marble
  • Plaster
  • Masonry and brickwork
  • Granite
  • MDF
  • Stone
  • Tiles
  • Resin
  • Concrete
  • Pre-painted surfaces

Drying Time: In normal drying conditional allow a minimum of 1 hour between coats. Drying time can be reduced by circulating warm air around the painted surface. Completely cured within 72 hours under normal conditions.

Coverage: 1 litre will complete (with the recommended minimum 3 coats) an area approximately 2.5m2 in size. Coverage can vary by colour and application.

Composition: Water-based

VOC Content: Minimal VOC content. This product contains max 6g/l VOC


VIDEO


GALLERY


CUSTOMER GALLERY


CUSTOMER REVIEWS

See More Reviews
Write a Review

APPLICATION

Brush Application

  1. Stir coating well before use . To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted or lacquered surfaces.
  2. Apply StoneLux Primer using an economy natural bristled brush. Allow 1-3 hours to dry depending on conditions. A second coat of Primer may be applied where there is a significant colour change.
  3. Use an economy natural bristled brush. Lay a thin even coat of Fireplace Stone Coating onto the substrate. Ensure the paint is applied evenly to avoid concentrated areas of stone. Allow 1 - 3 hours drying time depending on conditions. Repeat step 3 applying a MINIMUM of 3 coats.
  4. If brush strokes remain, the final coat can be stippled while still wet using a small stipple or paste brush.

Application Tips

  • Use an economy natural bristled brush.
  • We recommend a minimum of 3 coats for a professional
  • Circulate warm air around the painted surface to decrease drying times.
  • If you catch or scuff the drying coating, simply brush over using your damp paint brush.

Spray Gun Application

  1. Stir coating well before use . To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted or lacquered surfaces.
  2. Apply StoneLux Primer using an economy natural bristled brush, roller or spray. Allow 1-3 hours to dry depending on conditions. A second coat of Primer may be applied where there is a significant colour change.
  3. Apply Fireplace Stone Coating in multiple thin layers. Ensure each layer is touch dry before apply the next. We recommend a MINIMUM of 2-3 layers. Circulating warm air will reduce drying time.
  4. Texture Spray Gun - use a nozzle size between 2mm to 5mm.
  5. Gravity Fed Spray Gun - use a nozzle size between 1.8mm to 2.5mm.
  6. Various psi settings can be used for a light or heavy finish (approx. 60psi fr a medium textured finish).
  7. If necessary, The Stone Range can be diluted, using no more than 20% water.

DOWNLOADS

Technical Data Sheet:

Material Safety Data Sheet:

Fireplace Stone Coating Product Leaflet:

 

CUSTOMER IMAGE WALL

 

ALSO AVAILABLE


INGLENOOK FIRESIDE


BRICK REPAIR FILLER


WINDOWSILL STONE COATING

Windowsill Stone Coating


GARDEN STONE COATING


 

 

 
 
 
 
© Copyright 2018 Stonelux Limited*