and easy to apply using a brush or spray. Simply follow
the instructions on the back of the tin.
1. Clean the damaged brick, removing any loose material.
2. Apply Stabiliser to damaged area only using a small brush.
3. Replace the missing part of the brick using StoneLux Brick Repair Filler in your chosen shade(s). Shape the repair as you go usinga small pointing trowel or similar tool. If damage is deeper than 12mm you can build the repair in layers no thicker than 12mm and leaving 12-24 hours between layers to ensure they are fully dry(2-3 thin coats). Alternatively, you can use a 2 pack filler within 5mm - 10mm of the brick face. Allow to cure, then use StoneLux Brick Repair Filler to build the new brickface.
4. Apply final coat as in step 3. Stipple the surface while
still wet using a stippling brush or a small paste brush
to give a uniformed mottled appearance. Continue stippling
periodically until your desired effect is achieved.